DIY: How to Make a Discreet and Portable Pussy Pocket

If you’re looking for a fun and easy way to enhance your self-pleasure, consider making a pussy pocket! A pussy pocket is a homemade sex toy that mimics the feeling of penetrative sex. It’s cheap and easy to make, and you can customize it to fit your needs. All you need is a few simple materials and some basic crafting skills.

First, you’ll need to gather your materials. You’ll need a latex glove, a sturdy container (like a plastic cup or jar), and some lubricant. You can also add additional materials like sponges or cotton balls to create more texture. Once you have your materials, it’s time to get creative. Follow these simple steps to create your very own pussy pocket!

Section 1: Materials Needed

Step 1: Gather All Materials

Before embarking on the project of making a pussy pocket, you will need to gather all the necessary materials. The materials required include:

1. A sewing machine
2. Fabric that is soft and comfortable, like jersey knit or cotton
3. Elastic measuring 1/2 inch wide and 18 inches long
4. Scissors
5. Pins
6. Thread
7. Ruler or tape measure
8. Pen or marker

All of these materials can easily be found at any craft or fabric store.

Section 2: Creating the Pattern

Step 2: Creating the Pattern

The pattern is the blueprint for creating your pussy pocket. To create the pattern, take a measurement from the widest part of your hips. Add one inch to the measurement and divide that number in half. This will give you the width of the fabric needed to create the pocket.

Next, take a measurement from the bottom of your hips to the top of your pubic bone. Add three inches to the measurement and that will give you the length of the fabric needed to create the pocket.

Using these measurements, cut out your fabric to create a rectangular shape that is the size you need.

Section 3: Sewing the Sides

Step 3: Sewing the Sides

Fold the fabric in half with the right sides facing. Sew the sides together using a straight stitch. Be sure to backstitch at the beginning and the end of the seam to ensure that it stays in place. Trim the excess fabric using scissors.

Section 4: Adding the Elastic

Step 4: Adding the Elastic

Fold the top edge of the fabric over by 1/4 inch and then fold it over again by 1 inch. Pin the fabric in place. Sew around the folded edge of the fabric, leaving a 2-inch gap. This gap will be used to insert the elastic.

Attach a safety pin to one end of the elastic and insert it through the gap in the fabric. Once the elastic has been inserted into the fabric, overlap the ends of the elastic by 1 inch and sew them together. Sew the gap in the fabric closed.

Section 5: Finishing the Edges

Step 5: Finishing the Edges

Fold the bottom edge of the fabric over by 1/4 inch and then fold it over again by 1 inch. Pin the fabric in place. Sew around the folded edge of the fabric, leaving a 2-inch gap. This gap will be used to insert the elastic.

Attach a safety pin to one end of the elastic and insert it through the gap in the fabric. Once the elastic has been inserted into the fabric, overlap the ends of the elastic by 1 inch and sew them together. Sew the gap in the fabric closed.

Section 6: Making the Pocket

Step 6: Making the Pocket

To make the pocket, fold the fabric in half with the right sides facing. Sew around the two sides of the fabric, leaving the top open. Turn the fabric right-side out.

Section 7: Adding the Flap

Step 7: Adding the Flap

To add the flap, cut out a rectangular piece of fabric that is 5 inches wide and 4 inches long. Fold the fabric in half with the right sides facing and sew around the two sides of the fabric, leaving the top open.

Attach the flap to the front of the pocket by sewing it to the bottom of the pocket. The flap should be centered and the bottom of the flap should be about 1/2 inch above the bottom of the pocket.

Section 8: Adding Decorative Touches

Step 8: Adding Decorative Touches

You can add decorative touches to your pussy pocket to give it a unique and personal touch. You can use fabric paint or markers to create designs on the fabric. You can also add embellishments like lace or beading.

Section 9: Customizing the Fit

Step 9: Customizing the Fit

To customize the fit of your pussy pocket, you can adjust the length of the elastic. If the pocket is too loose, you can shorten the elastic. If the pocket is too tight, you can lengthen the elastic.

Section 10: Enjoying Your New Pussy Pocket

Step 10: Enjoying Your New Pussy Pocket

Congratulations, you have successfully created your own pussy pocket! You can now enjoy the benefits of having a comfortable and discreet place to store your personal items. Whether you’re going out to the club or staying in for the night, your pussy pocket will keep your things safe and secure.

Section 2: Materials Needed to Make a Pussy Pocket

1. Silicone Rubber

Silicone rubber is one of the most common materials used in making a pussy pocket. It is a non-toxic, non-sticky, and hypoallergenic material that is safe for use on the skin. The silicone rubber will be used to create the mold that will take the shape of the vagina.

2. Catalyst/ Hardener

This is the chemical responsible for giving the silicone rubber its hardness or toughness, making it firmer and more resilient. Depending on the type of silicone rubber you use, the hardener or catalyst may come separately or as part of the kit.

3. Mixing Bowl and Spoon

You will need a mixing bowl and spoon preferably made of plastic or wooden material. Avoid using metal utensils as the chemical components can react with the metal and alter the final product.

4. Vagina Template/Dildo

A vagina template or dildo will be used to form the inner layer of the pussy pocket. You can use an actual mould of a vagina or a dildo that is similar in size and shape. The template will be wrapped with the silicone rubber mould.

5. Lubricant

To achieve a realistic feel of the pussy pocket, using a water-based lubricant is necessary. It makes it easier to slide in and out of the pussy pocket.

6. Desiccant Packs

Desiccant packs contain absorbent material that will help keep the silicone mould dry and prevent bacteria from growing in the mould.

7. Talcum Powder

Using talcum powder on the pussy pocket will help to keep it dry preventing moisture build-up which can lead to bacterial growth.

8. Scissors

To remove the finished pussy pocket from the mold, you will need to cut around the hardened silicone. A pair of scissors will be used for this task.

9. Clamps

Clamps will hold the silicone rubber in place when wrapping it around the template. It will ensure it sets in the right shape and size.

10. Sandpaper

Sandpaper will be used to smoothen the silicone mould surfaces. It will make it more polished and realistic-looking after the mold has been detached from the core template.

Section 3: Choosing the Right Material and Tools

Materials Needed

Once you have decided on the size and shape of the pussy pocket you want to make, the next step is to determine the materials you will require. The material you choose will depend on how you want the final product to look and feel. Here are some of the materials you can use:

Tools Needed

Along with the materials, you will also need some tools to make your pussy pocket. Here are some of the essential tools required for the job:

• A mixing bowl
• A stirring rod or spoon
• A measuring cup (preferably one with measurement lines)
• A mold or form in the shape and size you desire
• A release agent spray or powder (to prevent sticking)
• A heating element (microwave or oven)

Determining Quantity

Before you begin, calculate the amount of material required based on the size of the mold. This will help you determine the quantity of the material needed. Ensure that you have enough material to cover the entire mold and fill it to the desired level.

Preparation

After gathering the materials and tools, prepare your workspace. Ensure that the area is clean and free of dust. If possible, set up near a sink or water source for once the process is complete. It is also essential to read and follow the manufacturer’s instructions carefully for the molding material you intend to use.

Mixing the Material

Mixing the material the right way is crucial to make the pussy pocket of the desired quality. Follow the manufacturer’s instructions regarding the temperature and the amount of time required for mixing. Use a mixing bowl and a stirring rod to make the material, ensuring that it is mixed thoroughly.

In conclusion, making a pussy pocket requires careful consideration of the materials and tools needed. The process must be precise and careful to ensure that the final product is safe to use and looks and feels great. Follow these guidelines to make a quality pussy pocket that will stand the test of time.

That’s How You Make a Pussy Pocket, Folks!

Congratulations! You did it! You have your own pussy pocket now. I hope you enjoyed reading this article and learned something new. Remember, it’s important to take your time and be careful when making your own pussy pocket. You don’t want any injuries or accidents. If you have any questions or feedback, feel free to leave a comment below. Thanks for reading, and make sure to check back for more fun and exciting articles!