How to Build a TNT Cannon in Minecraft

If you’re tired of the standard way of attacking in Minecraft, TNT cannons are the way to go. They are powerful and can take down even the strongest mobs and blocks in the game. Making one can be a bit intimidating at first, but with some practice and patience, you’ll be blasting away in no time.

To create a TNT cannon, you’ll need a few things: Redstone, TNT, some blocks, and a dispenser. First, you’ll need to build a platform from which to launch your TNT. This can be done above or below ground, but make sure it’s a flat area so that your cannon won’t be hindered by obstacles. Once you have your platform, you can start building your cannon. It’s important to note that there are many types of cannons, but we will be focusing on a basic TNT cannon for this article.

Materials Needed for Making a TNT Cannon in Minecraft

To make a TNT cannon in Minecraft, you will need the following materials:

1. TNT: You’ll need at least four pieces of TNT to make a simple cannon.

2. Redstone Dust: This redstone dust will be used to power the TNT and initiate the explosion.

3. Wooden Planks: You’ll need wooden planks to construct the frame of the cannon.

4. Buttons/Lever: One button or lever will be enough to activate the TNT cannon.

5. Water Bucket: Water buckets are used to fill up the cannons’ chambers to extinguish the fuse of TNT.

6. Flint and Steel: You’ll need to ignite the TNT, which can be done with a Flint and Steel.

7. Building Blocks: You’ll require building blocks to create the base of the TNT cannon.

8. Slabs: Slabs can be crucial in building the cannon. They can act as a platform to place TNT or a foundation for your cannon.

9. Dispenser: Dispenser can be used to shoot TNT continuously without the need to reload them several times.

10. Hopper: Hoppers can be used to automate reloading, thereby firing TNT with more accuracy.

Steps to Make a TNT Cannon in Minecraft

Below are the steps to follow to create a TNT cannon in Minecraft:

Step 1: Building the base
Start by building the base of your TNT cannon. You may use any material for this, but a solid material such as obsidian or cobblestone is recommended. The base of the cannon should be about three blocks wide, four blocks long, and two blocks high.

Step 2: Constructing the Frame
Once you have built the base for the cannon, you need to construct the frame around the base, using wooden planks. You may want to construct a frame that is seven blocks wide, seven blocks long, and six blocks high.

Step 3: Adding Dispenser
After constructing the frame, add a dispenser in the middle of the wooden frame randomly. The dispenser will be used to launch the TNT.

Step 4: Adding Water Chamber
Now, create the water chamber around the dispenser covering the side of the dispenser with blocks and leaving an empty aperture on the top. Add water to cover the entire water chamber.

Step 5: Adding the Slabs
Next, add the slabs over the water chamber and make sure that they are positioned between the base of the cannon and the dispenser.

Step 6: Placing TNT
Place a piece of TNT on top of the chains of slabs on either end of the water chamber. This will ensure that the explosion of the TNT will launch it with considerable speed.

Step 7: Ignition Mechanism
A button or lever is used to activate the cannon; if you use a button, it should be placed beside the dispenser. If you use a lever, it can be attached to the back of the dispenser. A Redstone line should join the lever to the dispenser.

Step 8: TNT Activation
The next step is to activate the TNT. You can use a flint and steel to ignite the TNT or simply activate the lever or button that is connected to the dispenser.

Step 9: Fine-tune the TNT Cannon
After successfully making a TNT cannon, fine-tune it by experimenting with different combinations of TNT, adjusting its angle of launch, and modifying the ignition mechanism. This will help ensure a successful shot when you want to use your TNT cannon in full swing.

Step 10: Test Your TNT Cannon
The final step is to test the cannon and witness the explosive firepower that it exudes. You can fire the cannon in different directions and distances to see how far it can launch the TNT.

In conclusion, making a TNT Cannon in Minecraft is a fun and straightforward process that can help you deal with hordes of enemies and demolish structures in the game. By following these steps, you too can become an expert in the art of making TNT cannons in Minecraft and make your gameplay a much more exciting one.

Building a TNT Cannon in Minecraft: The Steps You Need to Follow

If you love playing Minecraft and want to take your gameplay to the next level, then learning how to make a TNT cannon is a great way to do it. TNT cannons can blow up structures and enemies from a distance—giving you a strategic advantage in the game. Here’s how to create a TNT cannon in Minecraft:

Step 1: Gather Resources

Before you start building your TNT cannon, you’ll need the right resources. You’ll need 10 blocks of obsidian, 15 blocks of stone, 5 blocks of redstone, one lever, one button, and of course, TNT. You can find obsidian in the Nether, and stone can be mined from any stone block in the Minecraft world.

Step 2: Build the Base

The first step in building a TNT cannon is to create a solid base. Start by placing five blocks in a row. Then place two blocks next to the first and fifth blocks, creating a “U” shape. Fill in the bottom of the “U” with four more blocks. You’ve just created the base of your TNT cannon.

Step 3: Build the Walls

Next, build the walls of your cannon. Stack three blocks on top of the first and fifth blocks of the base. Then place two blocks on top of the second and fourth blocks. You should now have three pillars.

Step 4: Add the Redstone and TNT

Place a block of redstone on top of the second block of each pillar. Then place a TNT block on top of the redstone. Do this for all three pillars.

Step 5: Add the Lever and Button

Place a lever on the top of the center pillar and a button on the top of each of the other two pillars.

Step 6: Add a Back Wall

Place a back wall behind the TNT cannon. This can be any block of your choosing.

Step 7: Prime the TNT

To prime the TNT, you need to activate the redstone. Flip the lever on the center pillar, and then press one of the buttons on the other pillars. This will activate the TNT.

Step 8: Disconnect the Redstone

Once the TNT has been activated, disconnect the redstone to prevent the TNT from exploding prematurely. You can do this by breaking the connection between the redstone and the TNT.

Step 9: Fire the Cannon

Now that your TNT cannon is set up, it’s time to fire it. Place your target within range of the cannon and then activate the TNT by pressing one of the buttons. Depending on the distance and power of your cannon, you can destroy anything from buildings to mobs.

Step 10: Refine Your Technique

Creating a TNT cannon is easy, but mastering it takes time and practice. Experiment with different distances and amounts of TNT to see what works best. The more you play with your TNT cannon, the more effective you’ll become. With these steps, you’re now ready to build your very own TNT cannon in Minecraft!

Building the TNT Cannon

After gathering the necessary resources, it’s time to start building a TNT cannon. Before starting, make sure you find a suitable location, preferably near a water source, as the project can get quite messy. Here are the steps to create your own TNT cannon:

Step 1: Create a base

The first step is to create a sturdy base for your cannon. Use cobblestone, stone, or any other durable material to create a 6×6 base that is at least 3 blocks tall. This base will provide the foundation for the rest of the cannon.

Step 2: Add the “Chamber”

The chamber is where you will place TNT that will be launched out of the cannon. Create a 3×3 square in the center of your base, leaving a 1-block space in between the chamber and the base walls. This space will be used for redstone wiring that ignites the cannon.

Step 3: Create a “Barrel”

Next, create a barrel that will launch the TNT. The barrel should be made of non-flammable blocks, such as obsidian, stone, or cobblestone. Create a 3x3x3 hole in front of the chamber. The hole should be 3 blocks deep. This will be the barrel where the TNT will be loaded and fired.

Step 4: Set up the Redstone wiring

Now, it’s time to add the redstone wiring. Create a 3×3 area behind the cannon’s base. You will use this area to run redstone wiring from the ignition device to the TNT chamber. Place a redstone torch at the bottom and then place a redstone wire on top of it. Run the wiring up the back wall, over the top and down the front wall of the cannon.

Step 5: Load and Fire!

Finally, load the cannon with TNT and get ready to fire. Use a flint and steel to ignite the TNT in the chamber. The explosion will launch the TNT through the barrel and towards your target using the power of physics.

With these simple steps, you can build a TNT cannon and enjoy the power of launching TNT at your target in Minecraft. Be careful though, as this project can be quite dangerous if not done correctly. Always be safe and have fun!

That’s How You Make a TNT Cannon in Minecraft!

Thanks for sticking around and reading through this fun tutorial on how to make a TNT cannon in Minecraft. I hope you found this article informative and helpful. You can always come back here to learn more about gaming and Minecraft. Now, it’s time for you to go and explore Minecraft with your brand new TNT cannon. Have a blast!