DIY Guide: How to Make a Homemade Pocket Pussy

For men who want to experience sexual pleasure without spending a lot of money or investing in expensive sex toys, a pocket pussy is a popular choice. Also known as a fake vagina or a masturbator, a pocket pussy is a simple and discreet device that can be easily made at home with a few household items. If you’re curious about how to make your own pocket pussy, keep reading.

Making a pocket pussy may seem daunting at first, but it’s actually quite simple. By following a few basic steps, you can create your own personalized sex toy that is safe, comfortable, and effective. Whether you want to add some excitement to your sex life or you’re in between relationships, a pocket pussy can provide a fun and satisfying outlet for your sexual desires. So, let’s get started on creating your very own homemade pocket pussy.

Section: DIY Pocket Pussy – How to Make Your Own Sex Toy

Nothing beats the feeling of intense pleasure and sexual relief after a good masturbation session. However, commercial sex toys can be expensive or may not be readily accessible. Fortunately, with a few household items, you can make your DIY pocket pussy. Here, we’ll show you how to make your own sex toy with materials you already have at home.

Materials Needed:

• A towel

• A rubber glove

• A rubber band

• Sponges (two to three)

• Latex glove

• Lubricant

1. Get a towel – folded in half, then rolled, and placed inside a cylindrical container. The towel serves as the faux vagina, creating the perfect moist and tight environment for your penis. You can use a toilet paper roll, Pringles can or a cup as the container.

2. Cut the fingers off the rubber glove, then put it over the towel that’s inside the container. Ensure that this top layer fits tightly and is completely stretched over the towel.

3. To create a more realistic feel, place two to three clean sponges at the end of the container.

4. Put on a latex glove, and add lubricant inside your toy and on the outside of your penis.

5. Secure the open end of the rubber glove with a rubber band, so it stays in place.

6. Lube up well and enjoy private time!

Tips for Getting the Best Experience:

– Use plenty of lubricant to improve the sensation of your experience.

– Experiment with different container sizes, towels, sponges, and glove sizes to achieve your desired sensation.

– Create different textures by varying the number, size, and position of the sponges you use.

– Clean your toy as soon as you’re done, so it’s fresh and ready for your next session.

– Use a warm towel to clean your DIY pocket pussy and store it in a safe, dry, and discreet location.

Conclusion:

In short, making your own homemade pocket pussy can be an excellent solution if you’re seeking a cost-effective and accessible way to explore your sexual desires. By following our simple guide, you’ll easily create a DIY sex toy that you can use in the privacy of your own home. Get creative and experiment with different materials to make a pocket pussy that feels perfect for you. Have fun exploring!

How to Make a Pocket Pussy: Part 2

In part 1 of our guide, we discussed the basic materials you’ll need to make a DIY pocket pussy. In this section, we’ll go over the step-by-step process of putting it all together.

1. Cut and Shape the Inner Sleeve

The inner sleeve of your pocket pussy will be made from the foam insulation tubing. Cut a length of the tubing that’s slightly longer than the length of your penis, and use a sharp knife or pair of scissors to carefully shape it into a tapered cylinder that’s wider at one end than the other. This will give it a more realistic shape and a snugger fit.

2. Add Lubrication

Before you insert the inner sleeve into the outer casing, you’ll want to add a generous amount of lube to the inside of the sleeve. This will help create a more realistic, slippery sensation and prevent any uncomfortable friction.

3. Insert the Inner Sleeve

Now it’s time to put the inner sleeve inside the outer casing. Take your time and make sure you thread it through carefully to avoid any tears or kinks in the foam.

4. Test the Fit

Once the sleeve is inserted, give it a quick test run to make sure it fits snugly around your member. Adjust the outer casing as needed to ensure a comfortable fit.

5. Add More Lubrication

You can never have too much lube, so feel free to add more to the outside of the sleeve and the entrance of the pocket pussy for extra slipperiness.

6. Position the Outer Casing

To make the experience more realistic, position the outer casing in a way that mimics the position you typically masturbate in. This will enhance the sensation and make it feel even more like the real thing.

7. Start Slow

When you’re ready to get started, start slowly and sensually. Use your favorite hand movements, techniques, and rhythms to build up to a comfortable pace.

8. Experiment with Different Angles

One of the great things about making your own pocket pussy is that you can adjust the tightness and angle to your liking. Experiment with different angles and positions to find what feels best for you.

9. Clean and Store Properly

After your session, be sure to clean your pocket pussy thoroughly with warm water and soap. Let it air dry completely before storing it in a cool, dry place.

10. Enjoy!

With your homemade pocket pussy in hand, you’re now ready to enjoy a custom-tailored masturbation experience that’s sure to blow your mind. Experiment with different materials, shapes, and sizes to find the perfect fit for you. Happy masturbating!

Materials Needed for Making a Pocket Pussy

Making a homemade pocket pussy might seem like a daunting task, but with the right tools and materials, it can be a simple and fun project. Here are the materials that you will need to create your own pocket pussy:

1. Sock or Rubber Gloves: The first and fundamental thing you will need is either a sock or rubber glove. These items will serve as the base for your homemade sex toy. Make sure you choose a sock or rubber glove that are stretchy and can accommodate the size of your penis.

2. Rubber Bands: You will need one or two rubber bands, depending on which material you decide to use. These will be used to keep the sock or rubber glove in place and to create pressure around the entry hole.

3. Sponge: To create a realistic texture inside your homemade pocket pussy, a sponge is needed. You can purchase a natural sea sponge or any regular kitchen sponge will do.

4. Lube: Lube is essential for a comfortable and enjoyable experience when using your homemade toy. Make sure to use water-based lube, as oil-based lubes can damage the material used in your toy.

5. Scissors: You will need a pair of scissors to cut your chosen material to the desired size. So make sure you have one at hand.

Step-by-Step Guide: How to Make a Pocket Pussy

Now that you have gathered all the materials that you need, it’s time to move on to the next step which is creating your homemade pocket pussy. Here is the step-by-step guide:

Step One: Preparation
First, you need to make sure that your chosen material is clean and ready to use. Cut the sock or rubber glove to your preferred length and make sure it’s stretchy enough to fit your penis.

Step Two: Adding Texture
Take the sponge and insert it into the sock or rubber glove. You may need to trim the sponge to fit according to the size of the sock or rubber glove. The sponge should be placed at the base of your toy for a more realistic feel.

Step Three: Securing the Base
Take one or two rubber bands and place it around the base of the sock or rubber glove. Make sure it’s tight enough to create pressure around the entry point.

Step Four: Lube it Up
Apply a generous amount of lube on the sponge and the entrance of your toy. This will provide better sensations and increased pleasure.

Step Five: Ready to Use
Now that your homemade pocket pussy is complete, it’s ready to use. The flexibility of the materials used allows you to choose any position you desire according to your preference.

What to Avoid When Creating a Pocket Pussy

While creating a pocket pussy can be an enjoyable and rewarding experience, there are a few things to avoid for safety and hygiene purposes. Here are some of the things that you should avoid:

1. Using Toxic Materials: Materials that are toxic or known to cause allergies should be avoided at all costs. Stick to materials that are safe for the body.

2. Using Sharp Objects: Avoid using sharp objects as this could cause injury. Use scissors when necessary and make sure to handle with care.

3. Sharing Your Homemade Pocket Pussy: Sharing your homemade toy may expose you and your partner to infections. It’s best to use it solely for solo play and keep it to yourself.

In Conclusion

Creating your own pocket pussy can be liberating and a fun experience. With the right materials and a little imagination, you can have a homemade toy that provides a satisfying experience. Make sure to follow the steps and safety tips mentioned above to ensure a pleasurable and safe experience.

Happy Crafting!

We hope you found this article useful and enjoyed learning how to make your own pocket pussy. Remember to always use safer sex practices and appropriate materials when crafting your toy. Thank you for reading and please visit our website again for more DIY sex toy tutorials and other fun tips! Stay safe and have fun!