If you’re looking to add some more size and girth to your penis, making your own penis pump could be just the solution that you need. While there are plenty of commercial options available, they can often be expensive and not as effective as they claim to be. But don’t worry, creating your own penis pump is easier than you might think and can be done with items that you likely already have lying around at home.

One of the primary benefits of making your own penis pump is that it can be customized to fit your specific size and needs. Plus, creating your own pump can be a fun and rewarding project that gives you the satisfaction of knowing that you made it yourself. In this article, we’ll guide you through the steps to create your own penis pump, so you can start experiencing gains in size and confidence.

DIY: How to Make a Penis Pump at Home

Are you one of those men who would like to experience the benefits of a penis pump but don’t want to spend a fortune on a commercial one? Don’t worry, it’s easy to make one at home using various household items. Here’s a step-by-step guide to making your own penis pump!

Required Equipment

Before you get started, you need to make sure you have all the necessary equipment at hand. These include a cylinder, a pump, and a rubber seal. You can get them at a hardware or sex toy store, or order them online.

How to Make a Cylinder

A cylinder is the main part of the pump that will house your penis. You can use a PVC pipe or a plastic bottle as a cylinder. Cut off the bottom part of the cylinder using a saw or scissors, then smooth the edges with sandpaper.

How to Make a Pump

A pump is what you use to create the vacuum that will draw blood into your penis. You can either buy a hand pump or make one yourself. To make a hand pump, you’ll need an empty plastic bottle, a cork, and a bicycle pump needle. Drill a hole in the cork, insert the needle, then attach the cork to the bottle. Voila! You have a homemade pump.

How to Make a Rubber Seal

The rubber seal is what will keep the vacuum inside the cylinder, so it’s important to get this right. You can use a rubber gasket or a rubber plumbing fitting. Cut it to size so it fits snugly around the opening of the cylinder.

Assembly

Now that you have all the necessary components, it’s time to assemble your homemade penis pump. Attach the rubber seal to the cylinder using glue or silicone adhesive. Then insert the pump into the hole in the seal, and you’re ready to go.

Usage

To use your homemade penis pump, slide your penis into the cylinder and create a vacuum by pumping the hand pump. Start slowly and gradually increase the pressure until you feel a comfortable level of suction. Hold the vacuum for 10-15 minutes, then release it by opening the valve on the pump.

Clean-up

After use, it’s important to clean your penis pump thoroughly to prevent the build-up of bacteria or mold. Disassemble the pump, cylinder, and seal, then soak them in warm soapy water for at least 20 minutes. Rinse them under running water, then dry them with a clean towel.

Warnings and Risks

While using a penis pump can be a safe and effective way to enhance penis size and performance, there are some risks involved. Overuse or incorrect usage can cause damage to the penis, including bruising, blisters, and burst blood vessels. Always follow the instructions carefully and start gradually to avoid injury.

Conclusion

Now that you know how to make a penis pump at home, you can experience the benefits of this tool without breaking the bank. Just remember to take it slow, be patient, and practice proper hygiene and safety measures. Happy pumping!

Section 2: Materials Needed for Homemade Penis Pump

1. PVC Pipe

When it comes to making a homemade penis pump, the essential material you need is PVC pipe. PVC (polyvinyl chloride) pipes are readily available at any hardware store. You can buy a pipe that fits your penis size comfortably. A 2-inch diameter pipe should be a good starting point. Measure the length of your penis, and choose a pipe that’s at least 3 inches longer than your penis.

2. End Caps

You will also need two PVC end caps to seal the pipe. You can get them at the same hardware store you bought the pipe from. Make sure to get end caps that fit the diameter of your PVC pipe.

3. Hose

A hose is another material that you will need to make your homemade penis pump. The hose will be responsible for creating suction and pumping your penis. You can get a clear hose with an inner diameter that fits tightly on the PVC pipe. It should be long enough to reach from the end cap on one end of the PVC pipe to the hand pump on the other end.

4. Hand Pump

To create the suction needed for a penis pump, you will need a hand pump. A hand pump is a device that allows you to create a vacuum in the PVC pipe. You can get a hand pump in an auto parts store or a medical supply store.

5. Lubricant

It’s essential to use lubricant when using a homemade penis pump. Lubricant helps to prevent irritation and chafing caused by the friction between your penis and the PVC pipe or hose. Use water-based lubricant because it’s safe for the penis.

6. Silicone Sealant

To make sure that your homemade penis pump is airtight, you need silicone sealant. Seal the end caps and joints of the PVC pipe with the silicone sealant. Allow the sealant to dry completely before proceeding with the next step.

7. Screwdriver or Drill

You will need either a screwdriver or drill to make a hole on the PVC end cap that fits the hose. Make sure the hole is precisely the size of the hose to avoid air leaks. A screwdriver should do the job, but if the PVC end cap is too thick, you can use a drill.

8. Sandpaper or File

Sandpaper or file is a useful tool to use after drilling a hole on the end cap. The edges of the hole can be rough, and you don’t want to damage the hose as it slides in and out. Use sandpaper or file to smooth the edges of the hole.

9. Scissors or Sharp Knife

To cut the hose to the right length, you will need a pair of scissors or a sharp knife. Cut the hose to a length that fits tightly on the PVC pipe and reaches the hand pump. Make sure not to cut the hose too short; otherwise, it won’t reach the hand pump.

10. Tape Measure

A tape measure is a helpful tool to have when making your homemade penis pump. Use it to measure the length and girth of your penis and the PVC pipe to ensure a comfortable fit. Measuring correctly also ensures that you don’t buy a PVC pipe or hose that’s too small or too large for your penis.

Materials Needed

Before you begin to create your own penis pump, you will need to gather materials that can be easily obtained from your local hardware store or home improvement center. Here is a list of items that you will need:

Item Quantity
Clear plastic cylinder 1
Vacuum hose 1
Vacuum pump 1
Soft rubber seal 1
Lubricant As needed

Step 1: Prepare the Cylinder

The first step to create a penis pump is to prepare the clear plastic cylinder. Begin by drilling a small hole at the end of the cylinder. This hole will be the outlet for the vacuum hose. Once the hole is drilled, use sandpaper to remove any sharp edges.

Step 2: Mount the Rubber Seal

Next, the soft rubber seal must be mounted onto the cylinder. The seal will provide a comfortable and secure fit as well as keep the vacuum inside the cylinder. To do this, apply some adhesive glue around the circumference of the cylinder and press the rubber seal into place. Be sure to let the glue dry for at least 30 minutes before continuing.

Step 3: Attach the Vacuum Hose

Using a vacuum hose, attach one end to the hole at the end of the cylinder and the other end to the vacuum pump. Be sure that the hose is securely attached to avoid any air leakage which would prevent an effective vacuum.

Step 4: Apply Lubricant

Before using the pump, it is recommended that a water-based lubricant be applied to the penis. This will make the experience more comfortable and help create a proper seal around the base of the penis.

Step 5: Begin Pumping

Now you’re all set and ready to pump. Turn on the vacuum pump and watch as the cylinder fills with air. The vacuum will create negative pressure, causing blood to rush into the penis and creating an erection. For best results, repeat the process for 10-15 minutes and discontinue use if any discomfort occurs.

In conclusion, creating your own penis pump can be fun and inexpensive. By following the steps outlined above, you can enjoy the benefits of having a larger and stronger erection without breaking the bank. Remember to always be safe and seek medical advice if needed.

Satisfied and Ready to Go

And that’s it! Now you know how to make your own penis pump. It is undoubtedly a cheap and easy-to-make alternative to buying expensive commercial versions. So, what are you waiting for? Go ahead and try it out! And don’t forget to thank us after you get amazing results. We hope you enjoyed reading this article and learned something new. We are always happy to provide information, so come back next time for more amazing content.