Popsockets are a popular accessory among smartphone users. These expandable grips are attached to the back of a phone and can be used to hold the device securely, stabilize it during photography or even work as a stand.

However, over time, the adhesive that keeps the popsocket attached to the phone may lose its stickiness, causing frustration for the user. If you find yourself in this situation, don’t worry – there are a few easy ways to make your popsocket sticky again, without needing to replace it. This article will provide you with some simple tips and tricks to restore your popsocket’s adhesive and keep it firmly attached to your phone.

Section: Ways to make your Popsocket Sticky Again

Are you tired of your Popsocket not staying put on your phone? Fear not, because there are a number of easy ways to get your Popsocket to stick again. Below are some of the top methods to make your Popsocket sticky once more.

Clean the Surface of Your Phone

The first and most important step in making your Popsocket stick is to ensure that the surface of your phone is clean and free of debris. Use a microfiber cloth to wipe down the area where you plan to attach your Popsocket. Make sure there is no dirt, dust, or residue from any previous adhesive. A clean surface will ensure that the adhesive of the Popsocket has the best chance of sticking properly.

Soapy Water

If cleaning with a dry cloth doesn’t do the trick, try using a damp cloth with soapy water to remove any grime or residue. Be careful not to use too much water, as this can damage your phone. Dry the area thoroughly with a separate dry cloth before attaching the Popsocket.

Rubbing Alcohol

Another effective cleaning method is to use rubbing alcohol, which can dissolve grime and dirt while also disinfecting your phone. Take a cotton ball and soak it in rubbing alcohol, then apply it to the phone’s surface. Make sure it’s completely dry before sticking the Popsocket on.

Baking Soda

If the above methods fail, try using baking soda to clean the surface of your phone. Mix a small amount of baking soda with water to form a paste. Apply this paste to the phone’s surface using a soft cloth or sponge, taking care not to get any inside the phone. Wipe away the paste and dry the phone before applying the Popsocket.

Blow Dryer

If the surface is completely dry and still doesn’t seem to work, try heating the area where the Popsocket will be attached with a blow dryer. This can help activate any leftover adhesive on the Popsocket and make it stick again. Warm the area for a few seconds before attaching the Popsocket.

White Vinegar

White vinegar is another natural adhesive remover you can use. The acetic acid in vinegar helps dissolve adhesive, making it easier to remove old residue and make the surface sticky again. Dab some white vinegar on the phone’s surface with a cotton ball, let it sit for a few minutes, and then wipe it off with another clean cotton ball.

Hair Dryer

If you’re in a hurry, try using a hair dryer on the hot setting to heat the adhesive on the Popsocket and activate it. Hold the dryer about 6 inches away from the attachment point and heat it for 15-20 seconds before attaching your Popsocket.

Adhesive Spray

If the adhesive on your Popsocket is completely worn out or gone, you can try using an adhesive spray or glue. Just make sure it’s safe for your device. Spray or apply the adhesive on the phone’s surface, attach the Popsocket, and wait a few minutes for it to dry before using it again.

Change Your Popsocket Design

If all else fails, consider getting a new Popsocket design. This is less of a fix and more of an option to consider if you’re unable to get your Popsocket to stick again. Sometimes, all it takes is a new style or design to get you excited about using your phone accessory again!

Handle with Care

Lastly, to ensure that your Popsocket continues to stay sticky, handle it with care. Try not to bump it or touch it inappropriately, which can cause it to detach from the phone. Taking good care of your Popsocket will make it last longer and keep it sticky for a longer period of time.

In conclusion, there are a number of easy and effective methods to get your Popsocket to stick again. Follow these steps and take good care of your Popsocket, and it will continue to serve you well for a long time!

10 Ways to Make Your Popsocket Sticky Again

Popsockets are a great way to hold your phone and to make it easier to text, swipe, and take pictures. However, if the adhesive on your popsocket starts to wear off, it can become a nuisance. A popsocket that won’t stick to your phone defeats its entire purpose. If you’re struggling with keeping your popsocket sticky, don’t worry! Here are ten ways that you can make it sticky again.

1. Clean Your Phone’s Surface

One of the most common reasons why popsockets lose their stickiness is due to the buildup of dirt or oil on the back of your phone. Before you give up on your popsocket, try cleaning the surface of your phone with a damp cloth. Ensure that the surface is entirely dry before reapplying the popsocket.

2. Try Alcohol Pads

If a damp cloth doesn’t do the trick, you can try using alcohol pads to clean the surface. Rubbing alcohol can help to remove any oils from your phone, helping to promote a better bond between your phone and the popsocket. Remember to wipe down your phone after using alcohol pads and let it dry thoroughly before replacing your popsocket.

3. Apply Heat

If your popsocket’s adhesive is old or weakened, you can use heat to activate it again. Use a hairdryer to heat the back of your phone and the popsocket for a few seconds on low heat. The heat should soften the adhesive, making it stickier and more effective.

4. Use White Vinegar

If you want to try a natural alternative to rubbing alcohol, you can use white vinegar to clean your phone’s surface. Mix equal parts white vinegar and water, dip a paper towel into the solution, and wipe the surface of your phone. Be sure to dry the area thoroughly before re-applying your popsocket.

5. Change the Position

Sometimes, the adhesive on your popsocket can wear off because of frequent use. If you’ve used your popsocket for an extended period, try changing its position on your phone. A new area on the back of your phone may promote a better bond between the popsocket and the surface.

6. Use Double-Sided Tape

If your popsocket has lost its stickiness, you can replace the adhesive with double-sided tape. Cut the double-sided tape to size and stick it to the back of your popsocket. Peel off the backing and apply your popsocket to your phone.

7. Try Clear Nail Polish

You can also use clear nail polish to re-stick your popsocket to your phone. Apply a small amount of clear nail polish to the back of your phone and wait until it dries. Then, place the popsocket back onto your phone. The adhesive quality of the clear nail polish should help to hold it in place.

8. Use Adhesive Spray

Adhesive spray is another option to make your popsocket sticky again. Spray the adhesive onto the back of your phone and wait until it dries before re-applying your popsocket. Ensure that you use the adhesive spray in a well-ventilated area.

9. Replace the Adhesive

If all else fails, you can always replace the adhesive on your popsocket. You can buy popsocket replacement adhesives online or at phone stores. Remove the old adhesive from the back of your popsocket, clean the phone’s surface, and apply the new adhesive.

10. Consider Buying a New Popsocket

If your popsocket fails to become sticky again, it may be time to replace it. While popsockets are not expensive, they provide a vital function, and it’s worth considering buying a new one if the adhesive has worn off. Once you have a new popsocket, try to maintain its stickiness by cleaning your phone’s surface regularly.

In conclusion, you don’t have to throw away your popsocket when it stops sticking to your phone. With a bit of effort and some household ingredients, you can make it sticky again. Try out these ten methods to revive your popsocket’s adhesive, and your phone will be easier to use in no time.

How to Clean Your Popsocket:

After using your Popsocket for some time, it may have accumulated dust, grime, or any other substances that could cause it to lose stickiness. Cleaning your Popsocket regularly can prevent these substances from building up and retaining its adhesive properties. Here are some ways to clean your Popsocket:

Materials Steps
Water 1. Wet a cloth with water and wring out the excess water. 2. Gently wipe the surface of your Popsocket. 3. Allow it to air dry completely before using it again.
Alcohol 1. Soak a cotton pad with alcohol. 2. Gently wipe the surface of your Popsocket. 3. Allow it to air dry completely before using it again.
Baking Soda 1. Mix a teaspoon of baking soda with water to make a paste. 2. Apply the paste to your Popsocket and gently scrub it with a toothbrush. 3. Rinse it with water and allow it to air dry completely before using it again.

How to Reuse Your Popsocket:

If your Popsocket has lost its stickiness completely, you can try to reuse it by replacing the adhesive. Your Popsocket should come with a replacement sticker, but if it doesn’t, you can purchase one from a hardware store. Here’s how you can do it:

  1. Peel off the old adhesive from your Popsocket.
  2. Clean the surface of your Popsocket carefully using one of the methods explained in the previous section.
  3. Peel off the protective backing of the new adhesive sticker and align it with the base of your Popsocket.
  4. Press the new adhesive firmly onto the base of your Popsocket. Make sure there are no air bubbles.
  5. Allow the adhesive to set for at least 10 minutes before using it again.

How to Prevent Your Popsocket from Losing Stickiness:

Prevention is key when it comes to making your Popsocket sticky again. Here are some tips on how to keep your Popsocket clean and maintain its adhesive properties for a longer time:

  • Handle your Popsocket with clean hands.
  • Avoid placing your Popsocket on dusty or dirty surfaces.
  • Avoid using your Popsocket on wet surfaces.
  • Avoid pulling your Popsocket too hard or too frequently.
  • Store your Popsocket in a clean and dry place when not in use.

When to Replace Your Popsocket:

Although Popsockets are durable and made to last, there will come a time when it needs to be replaced. Here are some signs that your Popsocket needs to be replaced:

  • It no longer sticks to your device.
  • It has cracks or damages.
  • It’s lost its elasticity and no longer pops in and out as it should.
  • It’s become too dirty and damaged beyond repair.

In Conclusion:

Keeping your Popsocket sticky again is easy as long as you know how to take care of it correctly. Follow the tips and techniques mentioned in this article, and you can maintain its adhesive properties for a longer time. And when it’s time to replace your Popsocket, don’t hesitate to do so to ensure your device’s security and safety.

Keep Your Popsocket Sticky and Strong

That’s all we’ve got on how to make a Popsocket sticky again! Hopefully, these tips have helped you avoid throwing out a perfectly good phone grip. Just remember to clean your Popsocket, reapply adhesive, and let it dry overnight. For those that are new to using a Popsocket, welcome to the club! Be sure to check back with us for more helpful tips and tricks to bring your daily life to the next level. Thanks for reading, and you’re always welcome here!