How to Make an Apple Pipe

Do you ever find yourself without a smoking device, but have an apple on hand? With just a few simple steps, you can turn that apple into a functional and environmentally friendly pipe. Not only is it an easy DIY project, but it’s also a great way to conserve resources and reduce waste.

To make an apple pipe, you’ll need a few basic items: an apple (of course), a small knife or sharp tool, and a smoking substance. First, select a ripe apple and wash it thoroughly to remove any dirt or residue. Next, use your knife or tool to carve a small hole at the top of the apple where the stem would be. This will serve as your bowl. Then, carve a second hole at a 90-degree angle from the first, towards the center of the apple. This will serve as your mouthpiece. Finally, use a toothpick or other small implement to poke a series of holes in the bottom of the bowl, to allow for airflow. Add your smoking substance to the bowl, light it up, and enjoy!

Section: How to Make an Apple Pipe

Turning an apple into a pipe is an ingenious solution when you don’t have any smoking devices at hand. It’s an easy DIY project that requires just a few tools and is a great way to repurpose a fruit that might otherwise go to waste. Read on to learn how to make an apple pipe in ten easy steps.

Gather the Materials

Before you begin, you’ll need to gather a few materials. You’ll need an apple, a sharp knife, a skewer or a pen, and some cannabis. Choose a firm apple that’s not too ripe, and ensure that your knife is sharp enough to make clean cuts.

Prepare the Apple

Wash the apple thoroughly and use a towel to dry it. Then, use your knife to cut off the top of the apple, about 1/2 inch from the stem. Set the top piece aside as you’ll be able to use it later.

Create the Bowl

Use the knife to carve a small bowl in the center of the apple, deep enough to hold the cannabis. Carve carefully to prevent the bowl from being too big or too shallow.

Create the Downstem

Use the skewer or pen to poke a hole through the side of the apple, aiming towards the center of the bowl. Ensure that the hole is big enough for the smoke to flow through.

Create the Carb

Carve a small hole on the side of the apple, a bit above the middle, but in line with the downstem. This is where you’ll place your finger to allow air to flow through the pipe when you inhale.

Smooth Out the Edges

Use your knife or a sandpaper to smooth out any rough edges around the bowl, the downstem, and the carb. Make sure your bowl surface is smooth; otherwise, chunks of the cannabis flower can slide through the gaps.

Draw Airflow Test

Place your mouth over the opening of the apple where the bowl was and try to inhale. If air is not being pulled through, use the skewer or pen to make the holes bigger.

Place Cannabis on the Bowl

Take a small amount of the cannabis flower and grind it into smaller pieces before loading it into the apple bowl. Be sure to pack it down enough to avoid airflow resistance.

Heat and Inhale

Use a lighter or a match to start heating the cannabis on the top of the bowl while inhaling from the hole you created. Allow the bowl to collect a small amount of smoke before releasing your finger from the carb and inhaling it wholly into your lungs.

Discard the Apple After Use

Once you’re done smoking, discard your apple pipe properly. It’s biodegradable, so it can go into the compost heap. Alternatively, you could slice it up and eat it as a snack.

Making an apple pipe is not only fun and creative, but it’s also an environmentally friendly smoking solution. Plus, most people have an apple at home and don’t need to go out and buy anything extra. So, next time you find yourself without a pipe, give this DIY method a try.

Materials Needed to Make an Apple Pipe

Now that we have gone over the basics of how to make an apple pipe, let’s take a closer look at the materials you will need to make one properly.

1. An Apple – The first thing you will need is obviously the apple itself. It’s important to choose an apple that is firm and isn’t overly ripe. This will make it easier to create the bowl and prevent the apple from falling apart while you’re smoking.

2. A Pen or Pencil – This will be used to poke a hole through the top of the apple and create the bowl. Be sure to choose a pen or pencil that is sturdy enough to penetrate the apple without breaking.

3. A Knife – You will need a knife to carve out the bowl and create a pathway for the smoke.

4. A Fork or Toothpick – This will be used to create small holes in the apple that will serve as the mouthpiece.

5. Aluminum Foil – This is optional, but it can be used to line the bowl and create a more even burn.

6. Cannabis – Of course, you will need some cannabis to smoke for this DIY project. Be sure to choose a strain that is suitable for smoking in an apple pipe.

7. Lighter or Matches – You will need a source of flame to light the cannabis.

8. Grinder – While not necessary, a grinder can make it easier to prepare your cannabis for smoking.

9. Container or Tray – This will be used to hold your apple pipe and prevent any debris from spilling out.

10. Paper Towels – Finally, have paper towels handy to clean off any residue from the apple and your smoking equipment.

It is important to gather all of your materials before starting the process of making an apple pipe to ensure a smooth and seamless creation process. Be sure to choose high-quality and well-maintained materials to ensure a great smoking experience.

Step-by-Step Guide on How to Make an Apple Pipe

Now that you have gathered all the necessary tools and materials, it’s time to start creating your homemade apple pipe. This guide will provide you with the step-by-step process on how to make an apple pipe.

Step 1: Choose the Right Apple

The first step in making an apple pipe is to choose the right apple. You will want to use a fresh apple that is firm and ripe. Avoid using apples that are soft or have bruises, as they will not hold up well during the process. The ideal apple for a pipe is a medium to large-sized apple which has a firm texture.

Step 2: Cut the Top of the Apple

Using a sharp knife, cut off the top of the apple, making sure it is wide enough to fit your finger. This will serve as the bowl of the pipe where you will place the herb.

Step 3: Remove the Core

Using a knife or a spoon, remove the core of the apple. Be sure to remove all the seeds and the woody center of the apple. This will serve as the pathway where the smoke will flow through.

Step 4: Carve a Hole and a Carb

Using a knife, carve a hole at the side of the apple opposite the top. This will serve as the stem of the pipe where you will inhale the smoke. Next, make sure to carve a small hole or carb near the base of the apple where the stem enters. The carb is necessary to control the airflow and the amount of smoke you inhale.

Step 5: Load and Enjoy

Now that you have created your apple pipe, it’s time to load it up and enjoy it. Grind up your herb, set it in the bowl, light it up, and inhale through the stem. Enjoy the sweet taste of the apple while getting high.

In conclusion, making an apple pipe is easy, fun, and a great alternative to traditional pipes. It’s perfect for those who want to get high quickly without having to spend money on a real pipe. So grab your tools, choose a fresh apple, and start making your homemade apple pipe today!

Now, You’re Ready to Smoke Apple Like a Pro

You have learned how to make an apple pipe! It’s that easy and you can even enjoy it with your friends. Just make sure to clean up the mess and use them correctly. Thanks for reading and we hope to see you again soon! Keep visiting for more tips and tricks about smoking. Enjoy your apple pipe and happy smoking!